Department of Electrical Engineering, National Taipei University of Technology find us on facebook(將另開視窗)
Search this site | set the webpage to BLUE style set the webpage to ORANGE style set the webpage to GREEN style set the webpage to PURPLE style set the webpage to GRAY style ENLARGE the webpage | Site Map | Home | 中文(Chinese)
Home > People > Staff > Arthur Chou > Publication ::: Background | Teaching Timetable | Publication
::: Arthur Chou
A. Journal Papers
1. Shun-Yuan Wang, Foun-Yuan Liu, Jen-Hsiang Chou, “Adaptive TSK fuzzy sliding mode control design for switchedreluctance motor DTC drive systems with torque sensorless strategy", Applied Soft Computing 66 (2018) 278–291;https://doi.org/10.1016/j.asoc.2018.02.023(SCI, 2016 JCR Impact Factor:3.005, Ranking:Q1=21/133 in COMPUTER SCIENCE, ARTIFICIAL INTELLIENCE)
2. Shun-Yuan Wang, Chwan-Lu Tseng, Shou-Chuang Lin, Chun-Jung Chiu and, Jen-Hsiang Chou, "An Adaptive Supervisory Sliding Fuzzy Cerebellar Model Articulation Controller for Sensorless Vector-Controlled Induction Motor Drive Systems", Sensors 2015, 15, 7323-7348; http://dx.doi.org/10.3390/s150407323 (SCI, 2013 ISI Impact Factor:2.048, Ranking:Q1=10/57 in INSTRUMENTS & INSTRUMENTATION)
3. Jen-Hsiang Chou, Chih-Ming Hsu, Shun-Yuan Wang, Chii-Ruey Lin and June-Yen Jhuang, “Characterizing Microwave Power in a MPCVD System Using Gaussian Mixture Modeling,” Applied Mathematics & Information Sciences Vol.8 No.6 pp3005-3012 (2014) http://dx.doi.org/10.12785/amis/080639 (SCI, 2013 ISI Impact Factor: 1.232, Ranking:Q1=53/250 in Appl. Math)
4. Chwan-Lu Tseng, Shun-Yuan Wang, Shou-Chuang Lin, Jen-Hsiang Chou, and Ke-Fan Chen, "A Diagnostic System for Speed-Varying Motor Rotary Faults," Mathematical Problems in Engineering, Volume 2014 Article ID 310626, http://dx.doi.org/10.1155/2014/310626 (SCI, 2013 ISI Impact Factor: 1.082, Ranking:Q2 in ENGINEERING, MULTIDISCIPLINARY)
5. Shun-Yuan Wang, Chwan-Lu Tseng, Chaur-Yang Chang, and Jen-Hsiang Chou,“Estimator-based fuzzy credit-assigned cerebellar model articulation controller design for vector controlled induction motor drives,” Journal of the Chinese Institute of Engineers, Vol.37 2014 (SCI, 2013 ISI Impact Factor:0.209, Ranking:Q4 in ENGINEERING, MULTIDISCIPLINARY)
6. Shun Yuan Wang, Chwan Lu Tseng, Shou Chuang Lin, Jen Hsiang Chou, Yu Wen Chen, Wen Tsai Sung, "Self-Tuning Fuzzy Controller Design for a Switched Reluctance Motor Drive System,"Applied Mechanics and Materials Vol. 418 (2013) pp 100-103 (EI)
7. Shun Yuan Wang, Chwan Lu Tseng, Shou Chuang Lin, Jen Hsiang Chou, Yung Shun Chang, Wen Tsai Sung, "Hybrid Fuzzy-Sliding Control with Fuzzy Self-Tuning for Vector Controlled Drive Systems," Applied Mechanics and Materials Vol. 418 (2013) pp 96-99 (EI)
8. Shun-Yuan Wang, Chwan-Lu Tseng, Shou-Chuang Lin, Jen-Hsiang Chou, and Chih-Chen Chen,"Takagi-Sugeno Fuzzy Estimator Design for Adaptive Vector Control Systems", Applied Mechanics and Materials Vols. 284-287 (2013) pp 2337-2340. (EI)
9. Shun-Yuan Wang, Chwan-Lu Tseng, Chaur-Yang Chang, and Jen-Hsiang Chou,“Neural-network-estimate-based Twin Sliding Mode Controller Design for Vector Controlled Induction Motor Drives,” Advances in Information Sciences and Service Sciences Vol4, Nov.18 Oct 2012 (EI)
10. Chih-Ming Hsu, Jen Hsiang Chou, Chun-Yeon Lin, and Chii-Ruey Lin, “Raman Spectral Analysis of Multiwalled Carbon Nanotubes Using a Hierarchical Gaussian Mixture Modeling,” Adv. Sci. Lett. 9, 336-341 (2012). (SCI, 2010 ISI Impact Factor: 1.253, Ranking:Q2 in MULTIDISCIPLINARY SCIENCES)
11. Shun-Yuan Wang, Chwan-Lu Tseng, Chun-Jung Chiu, and Jen-Hsiang Chou, “Adaptive Speed Observer Based on TSK-Fuzzy Scheme for Vector Control Induction Motor Drives,” Adv. Sci. Lett. 9, 511-517 (2012). (SCI, 2010 ISI Impact Factor: 1.253, Ranking:Q2 in MULTIDISCIPLINARY SCIENCES)
12. Yung-Chung Wang, Jen-Hsiang Chou, Shun-Yuan Wang, “Loss Pattern of DBMAP/DMSP/1/K Queue and Application in Wireless Local Communications,” APPLIED MATHEMATICAL MODELLING 35, pp.1782-1797, 2011. . (SCI, 2010 ISI Impact Factor: 1.371, Ranking:Q1=16/87 in ENGINEERING, MULTIDISCIPLINARY)
13. 周仁祥、王振興(2001),我國高等技職教育招生之未來趨勢。技術及職業教育雙月刊,64期(pp.46-51)。
14. 李清吟、廖昭文、周仁祥(2000),“CIPP評鑑模式在實務專題課程上的應用-以台北科技大學電機系為例,”北京聯合大學高教研究,第2期(pp.44-50)。
B. Conference Papers
1. Shun-Yuan Wang, Tzu-Liang Chiang, Jen-Hsiang Chou, Fu-Rong Jean, Tung-Yu Wu, Wen-Tsai Sung, Ching-Yin Lee "Design of Adaptive Sliding Diagonal Recurrent Cerebellar Model Articulation Controller for Direct Torque Control Systems of An Induction Motor" 2018 IEEE International Conference on Systems, Man, and Cybernetics • SMC 2018 | October 7-10, 2018 • Miyazaki, Japan, pp.2414-2419 (EI)
2. Chwan-Lu Tseng, Shun-Yuan Wang, Fu-Rong Jean, Tung-Yu Wu, Jen-Hsiang Chou, Foun-Yuan Liu, "Type-2 T-S Fuzzy Multiple Feedback-Loop Guaranteed Cost Controller Design for Uncertain Singular Time-Delay Systems" 2017 IEEE International Conference on Systems, Man, and Cybernetics • SMC 2017 | October 5-8, 2017 • Bannf, Canada, pp.3002-3007 (EI)
3. Wen-Bin Lin*, Shun-Yuan Wang*#, Chwan-Lu Tseng*, Foun-Yuan Liu*, Jen-Hsiang Chou*, Ching-Yin Lee**, "Design of an Adaptive Output Recurrent Cerebellar Model Articulation Controller for Direct Torque Control System ", 2017 IEEE International Conference on Systems, Man, and Cybernetics • SMC 2017 | October 5-8, 2017 • Bannf, Canada, pp.2968-2973 (EI) (Chair of the session)
4. Shun-Yuan Wang, Chuan-Min Lin, Chwan-Lu Tseng, Jen-Hsiang Chou, and Bo-Lun Syu, "Design of a Fuzzy Sliding-Mode Controller for Induction Motor Vector Control Systems", Proceedings of 2016 International Automatic Control Conference(CACS), pp. 258-263. The Evergreen Laurel Hotel, Taichung, Taiwan, November 09-11, 2016(Chair of the session)
5. Shun-Yuan Wang*#, Chwan-Lu Tseng*, Foun-Yuan Liu*, Jen-Hsiang Chou*, Ying-Chung Hong *, Ching-Yin Lee**, “An Adaptive Sliding Self-organizing Fuzzy Controller for Switched Reluctance Motor Drive Systems,” 2016 IEEE International Conference on Systems, Man, and Cybernetics • SMC 2016 | October 9-12, 2016 • Budapest, Hungary, pp.383-388 (EI) (Chair of the session)
6. Shun-Yuan Wang, Foun-Yuan Liu, Jen-Hsiang Chou, “Design on Sliding Mode Controller with Adaptive Fuzzy Compensaion for Switched Reluctance Motor Drive Systems,” Proceedings of 2016 IEEE International Symposium on Computer, Consumer and Control, 4-6 July 2016, Xi'an, China. (EI)
7. Shun-Yuan Wang, Foun-Yuan Liu, Jen-Hsiang Chou, “Applications on Adaptive Recurrent Cerebellar Model Articulation Controller for Switched Reluctance Motor Drive Systems,” Proceedings of 2016 IEEE International Symposium on Computer, Consumer and Control, 4-6 July 2016, Xi'an, China. (EI) (The best paper award)
8. Shun-Yuan Wang1, Foun-Yuan Liu1, Chwan-Lu Tseng*1, Jen-Hsiang Chou1, Kuo-Ying Lee1, Ching-Yin Lee2, “Fuzzy Inference of Excitation Angle for Direct Torque-Controlled Switched Reluctance Motor Drives,” In Proceedings of 2015 IEEE International Conference on Systems, Man, and Cybernatics , pp.1139-1144, Oct. 9-12 2015, Hong Kong, China. (EI) (Chair of the session)
9. Lee-Min Lee, Fu-Rong Jean*, Tan-Hsu Tan, and Jen-Hsiang Chou, “Recognition of Packet Loss Speech Using the Most Reliable Reduced-Frame-Rate Data,” In Proceedings of 2014 IEEE International Conference on Systems, Man, and Cybernatics , pp.1825-1830, Oct. 5-8 2014, San Diego, CA, USA. (EI)
10. Shun-Yuan Wang, Chwan-Lu Tseng*, Foun-Yuan Liu, Jen-Hsiang Chou, Chun-Liang Lu, Ta-Peng Tsao, “Design of Adaptive Takagi-Sugeno-Kang Fuzzy Estimators for Induction Motor Direct Torque Control Systems,” In Proceedings of 2014 IEEE International Conference on Systems, Man, and Cybernatics , pp.2334-2339, Oct. 5-8 2014, San Diego, CA, USA. (EI) (Chair of the session)
11. Chwan-Lu Tseng, Shun-Yuan Wang *, Foun-Yuan Liu, Jen-Hsiang Chou, Yin-Hsien Shih, Ta-Peng Tsao, “An Intelligent Motor Rotary Fault Diagnosis System Using Taguchi Method,” In Proceedings of 2014 IEEE International Conference on Systems, Man, and Cybernatics , pp.2340-2345, Oct. 5-8 2014, San Diego, CA, USA. (EI) (Chair of the session)
12. Chih-Ming Hsu, Feng-Li Lian, Cheng-Ming Huang, and Jen-Hsiang Chou, “Heart Rate Variability Signal Processing for Safety Driving Using Hilbert-Huang Transform,” Proceedings of 2014 IEEE International Symposium on Computer, Consumer and Control, June 10-12, 2014, pp. 434-437. The Evergreen Laurel Hotel, Taichung, Taiwan. (EI)
13. Shun-Yuan Wang, *Chwan-Lu Tsen#, Shou-Chuang Lin, Jen-Hsiang Chou, “Design of Fuzzy Controllers for Direct Torque Control Systems,” Proceedings of 2014 IEEE International Symposium on Computer, Consumer and Control, June 10-12, 2014, pp. 994-997. (EI)The Evergreen Laurel Hotel, Taichung, Taiwan. (Chair of the session)
14. Chwan-Lu Tseng, *Shun-Yuan Wang, Shou-Chuang Lin, Jen-Hsiang Chou, Ke-Fan Chen, “A Motor Rotary Fault Diagnosis System Using Dynamic Structural Neural Network,” Proceedings of 2014 IEEE International Symposium on Computer, Consumer and Control, June 10-12, 2014, pp. 430-433. The Evergreen Laurel Hotel, Taichung, Taiwan. (EI)
15. Shun-Yuan Wang, Chwan-Lu Tseng, Shou-Chuang Lin, Shun-Chung Wang, Ching-Lin Chen, Jen-Hsiang Chou, “Design and Implementation of a Single-Stage High-Efficacy LED Driver with Dynamic Voltage Regulation ,” In Proceedings of 2013 IEEE International Conference on Systems, Man, and Cybernatics , pp.1438-1443, , Oct. 13-16 2013, Manchester, UK. (EI) (Chair of the session)
16. Jen-Hsiang Chou, Chih-Ming Hsu, Shun-Yuan Wang, Chii-Ruey Lin and Ching-Yin Lee, “Raman Spectral Analysis Based on Time-Frequency Analysis,” In Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernatics , pp.1730-1734, , Oct. 14-17 2012, COEX, Seoul, Korea. (EI)
17. Jen-Hsiang Chou, Shun-Yuan Wang, Chen-Wei Chang, and Ruey-Fong Chang, “A Novel Web-Enabled HMI/DAC Automation for Disaster Prevention and Alert Management,” In Proceedings of the 2010 IEEE International Conference on Systems, pp.2356-2363, Man and Cybernetics, Oct. 10-13 2010, Istanbul, Turkey. (EI)
18. Shun-Yuan Wang, Chwan-Lu Tseng, Chaur-Yang Chang, Chih-Chun Yeh, Jen-Hsiang Chou, “Adaptive Proportional-Integral Speed Controller for Direct Torque Control of Induction Motor Using Neural Networks,” Proceedings of 2010 International Symposium on Computer, Communication, Control and Automation, May 5-7, 2010, Tainan, Taiwan, pp. 145-147. (EI)
19. Shun-Yuan Wang, Chwan-Lu Tseng, Chaur-Yang Chang, Chih-Chun Yeh, and Jen-Hsiang Chou, “Adaptive Proportional-Integral Speed Controller for Direct Torque Control of Induction Motor Using Neural Networks,” in Proc. of the IEEE 3CA, pp. 145-147, May 5-7, 2010, Tainan, Taiwan.(EI)
20. Ruey-Fong Chang, Chen-Wei Chang, Jen-Hsiang Chou, and Shun-Yuan Wang, “A HMI/GUI Control in a Steam-Pretreated Process for Agriculture Wastes Reuses,” in Proc. of the IEEE 3CA, pp. 168-170, May 5-7, 2010, Tainan, Taiwan.(EI)
21. Wen-Yo Lee, Jhu-Syuan Guo, Ta-Chih Hung, Jen-Hsiang Chou, and Shun-Yuan Wang, “Multi-behavior Interactive Mobile Robot Implementation Over Mixed Reality," SIRCon2009, Aug. 6-7, 2009, Taiwan.
22. 王順源、周仁祥、曾傳蘆、徐偉倫、葉彥達、李文猶(2008),感應馬達直接轉矩控制系統之適應性高斯小腦模型控制器設計。中華民國第二十九屆電力工程研討會論文集(pp.640-644)。
23. 周仁祥、王順源、曾傳蘆(2004),植基於投影演算法之線上PID型小腦模型控制器設計。2004中華民國第十二屆模糊理論及其應用會議(CD)。
24. 周仁祥、林俊彥、王振興(2001),科技大學電機系專業學程之規劃研究。第十六屆全國技術及職業教育研討會論文集,一般技職及人文教育類(pp.9-18)。
25. 李清吟、廖昭文、周仁祥(2000),CIPP評鑑模式在「實務專題」課程上的應用-以台北科技大學電機系為例。2000年海峽兩岸技職教育學術研討會論文集(pp.551-562)。
26. 周仁祥、許駿煒、林輝亮(1999),技職教育中電機電子類論文研究方法之分析研究。第十四屆全國技術及職業教育研討會論文集,一般技職及人文教育類:評量組(pp.281-285)。
C. Patents
1. 王順源、曾傳蘆、練光祐、周仁祥、曾俊翰、邱俊榮, "感應馬達模糊轉速估測驅動裝置" 中華民國新型第M385166號、2010-07-21 。
2. 王順源、曾傳蘆、練光祐、周仁祥、曾俊翰、陳芷棽, "感應馬達模糊磁通估測器控制驅動裝置" 中華民國新型第M385165號、2010-07-21 。
3. 王順源、曾傳蘆、練光祐、周仁祥、曾俊翰、孫敏男, "感應馬達監督式小腦模型控制驅動裝置" 中華民國新型第M 360514號、2009/7/01~2018/12/25。
4. 王順源、曾傳蘆、周仁祥、郭灌力, "感應馬達直接轉矩小波小腦模型控制驅動裝置" 中華民國新型第M 351556號、2009/2/21~2017/12/25。
E. Other Publications
1. 周仁祥、許志明 編譯;Scott Grinnell著(2017),再生能源與永續性設計。東華書局。
2. 周仁祥、許志明 編譯;Alan B. Marcovitz 著(2016),邏輯與計算機設計 3/e Marcovitz (授權經銷版)ISBN:9789863412342。東華書局。
3. 王順源、曾傳蘆、周仁祥譯(2010),Intel系列微處理機(Brey 第八版)。東華書局。
4. 王順源、曾傳蘆、周仁祥、曹恆偉譯(2005),Intel系列微處理機(Brey 第七版)。東華書局。
Copyright © 2019 Department of Electrical Engineering, Taipei Tech. All Rights Reserved.
Address: No. 1, Sec. 3, Chung-Hsiao E. Rd., Taipei 106, Taiwan, Republic of China
Tel:+886-2-27712171 Ext.2100 Fax:+886-2-27317187
1803539 Visits since May 26, 2003